Sun Hydraulics has established a strong foundation for consistently delivering exceptional performance in all aspects of their business. From product design and service delivery, Sun Hydraulics stands out in the industry.

Since the beginning, Sun products have been setting the standard for the screw-in hydraulic cartridge valve industry. Sun's floating cartridge construction and cavity design approach allows products to operate precisely and reliably at higher pressures and flow rates in the most demanding applications. The generous porting area, coupled with our manifold design and construction techniques, result in integrated packages that can be up to 50% smaller than competitive offerings.

Sun cartridge valves are offered in five primary sizes, with flow capacity and controlled horsepower doubling with each successive size. Within each broad functional area (pressure, flow, load control, etc.), multiple variations are available to help you optimize your control circuit, from individual valves to complete integrated packages. Their expansive product line allows you to develop the best control solution for your hydraulic application.

Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.

• Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
• These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
• Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
• Will accept 5000 psi (350 bar) at ports 1 and 2.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

 

Technical Specification

Control - Not Adjustable
Cracking Pressure - 30 PSI With 2 Bar
Seal Material - Buna-N

Cavity	T-13A
Series	1
Capacity	15 gpm
Maximum Operating Pressure	5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt)	1 drops/min.
Valve Hex Size	7/8 in.
Valve Installation Torque	30 - 35 lbf ft
Model Weight	0.1 Kg
Seal kit - Cartridge	Buna: 990010007
Seal kit - Cartridge	EPDM: 990010014
Seal kit - Cartridge	Polyurethane: 990010002
Seal kit - Cartridge	Viton: 990010006