Sun Hydraulics has established a strong foundation for consistently delivering exceptional performance in all aspects of their business. From product design and service delivery, Sun Hydraulics stands out in the industry.

Since the beginning, Sun products have been setting the standard for the screw-in hydraulic cartridge valve industry. Sun's floating cartridge construction and cavity design approach allows products to operate precisely and reliably at higher pressures and flow rates in the most demanding applications. The generous porting area, coupled with our manifold design and construction techniques, result in integrated packages that can be up to 50% smaller than competitive offerings.

Sun cartridge valves are offered in five primary sizes, with flow capacity and controlled horsepower doubling with each successive size. Within each broad functional area (pressure, flow, load control, etc.), multiple variations are available to help you optimize your control circuit, from individual valves to complete integrated packages. Their expansive product line allows you to develop the best control solution for your hydraulic application.

Ventable, pilot-operated, balanced piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

• A remote pilot relief on port 3 (vent) will control the valve below its own setting.
• Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
• Main stage orifice is protected by a 150-micron stainless steel screen.
• Not suitable for use in load holding applications due to spool leakage.
• Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
• Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Specification

Control - Standard Screw Adjustment
Adjustment Range - 10.5 - 315 Bar / 150 - 4500 PSI / 100 PSI (70 Bar) Standard Setting
Seal Material - Buna-N