SAE 3000 PSI Swept 90 Deg Flange Hydraulic Hose Inserts

SAE 3000 PSI Swept 90 Deg Flange Hydraulic Hose Inserts

Regular price
Sale price
Regular price
Sold out
Unit price
Shipping calculated at checkout.

In Stock: 5000

SAE 3000 PSI Swept 90 Flange
Hose Tails


The hydraulic hose connectors are manufactured in accordance with various standards, including ISO, SAE, DIN, JIS, BS, and NF, to ensure a broad range of applications for hydraulic pressure hoses.

A Zinc coating and Cr-VI free zinc plating process ensures a high corrosion resistance of all carbon steel products, in accordance with EU and US regulations as well as SAE J516 and DIN EN ISO 12151 requirements.

The exclusion of hexavalent chromium ensures an eco-friendly outcome without diminishing corrosion resistance. This environmentally friendly option still offers the same level of reliable protection from corrosion.

The zinc-plating tested to EN ISO 9227 yields a minimum of 240 hours without corrosion, prior to crimping.

Flange 3000 psi and 6000 psi

The sealing mechanism is through compression of the Oring in the face of the flange head against the surface of the port connection. The flange fittings are generally separated into two pressure classes referred to as 21.0 MPa/ 3000 psi (SFL) or 42.0 MPa/ 6000 psi (SFS). In addition to these flanges, customer- specific Komatsu and CATERPILLAR flanges can also be found in the market.

Standard: ISO 6162-1,ISO 6162-2


Can't Find A Part? Ask us!
We specialise in sourcing hard to find specials, oddballs & obsolete parts, get in touch if you can't see what you are looking for.
01555 772474


The purchaser of these fittings must ensure that they are satisfactory for use in the application for which they are intended. No responsibility can be accepted by the manufacturers if any fittings are incorrectly or inadequately fitted, ie. torque values, pressure requirements, non-matching threads etc. USC Hydraulics assumes no liability for typographical errors or other errors.  For any precise technical information you must always contact our technical department. Dimensions and Data shown may be changed without notice.