Parker 701-16
4SP Hydraulic Hose

 

Parker's High Pressure No-Skive hoses 701 and 701TC are the preferred hoses for general high pressure hydraulic applications. The hoses are designed with a No-Skive construction and are suitable for a working pressure up to 45,0 MPa. Based on the advanced materials the hose type 701TC is highly abrasion resistant. The Parker High Pressure hose range is complemented by a full selection of compatible No-Skive fittings in steel and stainless steel.

Technical Information
Hose ID: 1" / 25.4mm
Hose OD: 1.563" / 39.7mm
Hose Cover Type: Standard
Maximum Operating Pressure: 28 MPa, 4000 psi, 280 bar
Minimum Bend Radius: 340 mm, 13.385 inch
Minimum Operating Temperature: -40 °F / -40 °C
Maximum Operating Temperature: 100 °C (Water 85°C / Air 70°C), 212 °F (Water 185°F / Air 158°F)
Specifications Met: EN 856, Type 4SP, ISO 3862, Type 4SP
Compatible Fitting: 70 Series
Application: High Pressure Hydraulics
Hose Reinforcement Material: 4 Spirals of High Tensile Steel Wire
Division: Polymer Hose Division Europe
Media: Air (General Industrial Air), Coolants (Glycol, Water-Glycol), Lubricants (Oils), Petroleum Hydraulic Fluids, Water
Industry: Industrial Manufacturing Equipment, Off-road Machinery, Transportation
Technology: Fluid & Gas Handling
Product Style: No-Skive Multispiral
Design Factor: 4:1
Materials of Construction: Rubber
Cover Material: Synthetic Rubber
Hose Inner Tube Material: Synthetic Rubber
Weight: 2.04 kg/m / 1.37 lb/ft


Features/Benefits
• Reinforcement of four spirals high-tensile steel wire - according to ISO 3862 - EN 856 Type 4SP.
• Matched hose and fitting system guarantees an approved and safe combination and the highest quality and safety, combined with the longest service life of the final product to the end-users.
• The hose type 701TC has a tough cover (TC) and is therefore ideal for applications where high abrasion resistance is required. Tough cover 80 x greater abrasion resistance than standard rubber cover hoses.
• 701TC is also MSHA approved and suitable for temporary immersion in mineral oil up to 70 °C with frequent inspections.
• Complete No-Skive fitting technology across the full range of medium pressure hoses providing simpler, quicker and safer hose assembly.

Applications
• General high pressure hydraulic applications

Parker's High Pressures Hoses 701 and 701TC are compatible with the Parker Parkrimp medium pressure fitting series 70.

 

 

Can't Find A Part? Ask us!
We specialise in sourcing hard to find specials, oddballs & obsolete parts, get in touch if you can't see what you are looking for.
01555 772474
sales@uscltd.co.uk

The purchaser of these items must ensure that they are satisfactory for use in the application for which they are intended.
No responsibility can be accepted by the manufacturers if any products are incorrectly or inadequately fitted. Goods may not be exact to image shown.