Parker 1EV3J310
Solenoid Valve
Parker Hannifin Corporation is a leading manufacturer of motion and control technologies and systems, including hydraulic and pneumatic valves.
The Isomax range of directional control valves, comply with ISO 15407-1 sizes 02 and 01 and ISO5599-1 sizes 1, 2 and 3 and provide flows from 720 Nl/min to 6500Nl/min.
The range includes both 5/2 and 5/3 valves, for pneumatic and electrical actuation with a wide choice of subbases and manifolds to suit different application needs.
EV310-2.5 W DC, 4.5 VA AC solenoids with CNOMO 06-05-10 interface and for cable plug DIN 43650 form B (supplied without cable plug)
Technical Information
Voltage: 110V AC
Manual Override: Locking
Weight: 0.17 KG
General Characteristics:
Standard Subbase: ISO 15407-1 and VDMA 24563
Permissible Fluid: Air or inert gas, filtered 40 μ (classe 5 according to ISO 8573-1), lubricated or non-lubricated
Piloting Pressure 5/2 bistable: 1 to 10 bar
Piloting Pressure 5/2 monostable: 2.5 to 10 bar
Piloting Pressure 5/3 monostable: 3 to 10 bar
Operating Pressure: -0,9 to 10 bar (for pressure under 2 bar, external pilot supply has to be connected)
Supply from exhaust: Possible
Flow (Qmax): DX01 = 1050 Nl/mn - DX02 = 720 Nl/mn
Working Temperatures: -10 to + 60°C (dry air)
Storage Temperatures: -20 to + 70°C
Mechanical Life: > 100 millions operations (dry air filtered 40 μ, 2 Hz, 6 bar, 20°C)
Actuation Type: Pneumatically or electrically with 15 mm solenoid valve interface CNOMO E06.36120N
Material Specification:
Valve Member - Seat: Self lubricating acetal - ceramic
Body: Polyamide reinforced fibreglass
Casing - End plates: Anodised aluminium - Painted zinc plated steel
Valve plate: Zamak
Seals: Nitrile
Springs: Stainless steel
Screws: Zinc plated steel
Function selector : Top cover - Seal: Polyamide reinforced fiberglass - Polyester
Can't Find A Part? Ask us!
We specialise in sourcing hard to find specials, oddballs & obsolete parts, get in touch if you can't see what you are looking for.
01555 772474
sales@uscltd.co.uk
The purchaser of these items must ensure that they are satisfactory for use in the application for which they are intended.
No responsibility can be accepted by the manufacturers if any products are incorrectly or inadequately fitted. Goods may not be exact to image shown.