New VEI-16 family incorporates a new solenoid concept providing excellent performance  and enables cartridges to work in severe environment. Cartridges also incorporates advanced design of hydraulic parts providing excellent hydraulic performance.

Technical Specifications
Installation Orientation: Unrestricted
Ambient temperature range: -30 to 90 °C (-22 to 194°F)
Max. operating pressure: 350 bar (5000 psi)
Flow range: 5L - 150 L/min (1 - 40 gpm)
Fatigue cycle life: 1 million cycles at 350 bar
Max. internal leakage: 20 drops/min. for X= 02,06
Switching time Opening: ≤ 50 ms
Switching time Closing: ≤ 100 ms
Fluid temperature range: -20 to 80 °C (-4 to 176 °F)
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 20 to 380 mm2/s (cSt)
Installation torque: 130 - 150 Nm (96 - 111 ft-lbs)
Recommended degree of fluid contamination: Nominal value max. 10 μm (NAS 8) ISO 4406 19/17/14
MTTFd: 150 years see RE 18350-51
Special Cavity: 021-E see 18325-75
Seal kit for X=02,06: Code - RG21E201052010 / material no. - R934003566
Seal kit for X=04,32: Code - RG21E201053010 / material no. - R934003567
Seal kit coil and standard cap: Code - RG02Z0010000100 / material no. - R930067869
Seal kit coil and protective cap only for Y=D: Code - RG03Z0010000100 / material no. - R930067870
Type of voltage DC voltage: Coil type D36
Supply voltage: See data sheet 18325-90
Voltage tolerance against ambient temperature: See characteristic curve
Power consumption: 20 W
Type of protection: See data sheet 18325-90
Weight: 0.35 kg (0.77 lbs)

Note: Coils must be ordered separately

The purchaser of these items must ensure that they are satisfactory for use in the application for which they are intended.
No responsibility can be accepted by the manufacturers if any products are incorrectly or inadequately fitted.
Goods may not be exact to image shown.