Hydraulic

Motors & Repairs

Suitable for applications such as conveyor drives, winches, agricultural machinery, forest machinery, cranes, sawmill equipment and lifts/elevators.

Below are some examples which are within our scope of supply.

  • Speed range 10-1400 RPM

  • Maximum continuous pressure drop 70-175 bar

  • Maximum continuous torque 45-300 Nm

  • Available with 2 or 4 bolt flange mounting various shaft options and rear ports

The MM series motor is of a small volume, economical type, which is designed with shaft distribution flow, adapting the advanced Gerotor gear set design providing compact volume, high power and low weight.

Features:

  • Advanced manufacturing devices for the gerotor gear set, providing small volume, high efficiency and long life.

  • Shaft seal bear high pressure motor of which can be used in parallel or in series

  • Advanced construction design, high power and low weight

Built in check valves ensuring pressure on the shaft seal does not exceed the return line pressure.

The MP series motor are an economical designed unit with shaft distribution flow which adapt the Gerotor gear set design and provide high power and low  weight  but  slightly  less  torque  than  the  MS  version.  Ideally  suited  for applications such as conveyors / brushes etc.

Size Range: 50cc to 315cc
Shaft options: Standard 25mm; 1inch; Splined (6)

The MR series motor adapts the advanced Geroler gear set design with shaft distribution flow, which can automatically compensate when operating at high pressure, providing reliable and smooth operation, high efficiency and long life.

Size Range: 50cc to 315cc
Shaft options: Standard 25mm; 1inch; Splined (6)

The MSY is a new series of motor adapting the advanced Geroler gear set designed with disc distribution flow and high pressure. The unit can be supplied with the individual variants in accordance with requirement of your applications.

MSY hydraulic motors with 4 bolt mount and 32mm parrallel key shaft.
Size Range: 80cc to 400cc

  • Speed range 680-2840 RPM

  • Maximum continuous pressure drop 160-200 bar

  • Maximum continuous torque 370-1250 Nm

  • High efficiency disc valve motors with various shaft and options

    Tachometer drive connection

MV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure. The unit can be supplied with a variety of shaft and flange options.

  •  Speed range 05-510 RPM

  • Maximum continuous pressure drop 105-200 bar

  • Maximum continuous torque 920-1880 Nm

  • High efficiency disc valve motors with various shaft options

  • Tachometer drive connections

Suitable for many low speed applications, eliminating gears, shafts, chains, belts, pulleys and other speed reduction components. All motors are compact and light in weight in proportion to the torque and power delivered. All are fully reversible.

Motor mounted lever operated directional control valves c/w 3 position detent kit. Manifold mounts directly onto ports of EPMS (OMS) motor

  • Nominal flow rate 25 l/min for X = 38

  • Nominal flow rate 50 l/min for X = 12

  • Nominal pressure 210 bar

  • Relief valve variation ratio 10-250 bar

Call now and get a cost effective quote

Whether you need to buy new, replace your existing hydraulic motor or need to repair

We also supply:

  • Hydraulic Brakes
  • Stand Alone Brakes
  • Hydraulic Pumps
  • Flow Dividers