Eaton industrial valves consistently deliver superior performance across stationary and mobile hydraulic applications. From press to bore, clamp to cut, lift to dig and beyond, they provide reliable operation even under extreme conditions.

Danfoss industrial valves and systems are designed with durability and reliability in mind, withstanding challenging operating conditions and delivering consistent performance across industrial applications.

These two-stage valves are used to limit or control pressure by directing up to the total system fluid flow to reservoir when system pressure reaches the setting of the valve. System actuators are thus protected against overload.
Each relief valve incorporates a vent port that can be connected to a separate pilot control valve to remotely control or unload system pressure.

Features and Benefits
• Close matching to application requirements from choice of four adjustment control  ranges covering 3 to 350 bar (44 to 5000 psi).
• Electrical on/off load from solenoid controlled models.
• Remote parallel control by other pilot valves connected to “vent” port.
• High machine productivity resulting from full system flow being available for work output until system pressure is very close to valve setting.
• Pressure override optimized without detriment to other performance parameters.
• Excellent repeatability and stable performance from cartridge-type design of mainstage parts.
• Low off-load power wastage.
• International mounting interfaces.
• Low installed cost and space requirement from high power/size ratios (more than double that of many conventional designs).

Technical Specifications
Mounting Surface ISO 6264: AR-06-2-A
Pressure adjustment control range: 3-350 bar (44-5000 PSI)
Type of manual adjustment: Screw/locknut
Maximum pressures Ports P and X: 350 Bar (5000 PSI)
Port T: 350 Bar (5000 PSI)
Maximum Flow Rate: 200L / Min (53 US GPM)
Drain Flow: 1.8 L / Min (0.47 US GPM)
Weight: 3.5 KG


https://assets.danfoss.com/documents/latest/407720/BC439975160003en-000102.pdf